Tec7 WP7-402 Stop Rising Dump 3 x 550ml

Stop Rising Damp is the final solution against rising damp that forms a water-repellent, horizontal barrier in walls. For all types of brick, even hollow that can also be used as a joint seal in solid natural stone walls. Stop Rising Damp can be used indoors and outdoors and is BBRI AAA + (Belgian Building Research Institute) certified.
FEATURES:
- For all types of walls: brick, natural stone, hollow bricks, etc.
- Wall thickness up to 40 cm (Apply both inside & outside on walls more than 40cm)
- Also for severely damp walls (up to 95% moisture content)
- BBRI triple A + inspection: always 100% effective!
- Simple application
- Safe, solvent-free and odourless product
APPLICATIONS:
- Invisible barrier for rising damp.
- Stops salt deposition from groundwater.
USE:
- Remove skirting boards, cover plates from electrical outlets and all plastering up to 25 cm above visible moisture or salt efflorescence. ? - Drill a hole of 12 mm diameter every 10 cm. The depth is the wall thickness minus 5 cm. For fastest effectiveness, drill in the lowest horizontal cement joint, above the ground surface outside. Inject double walls and walls thicker than 40 cm from the inside and outside at the same height. Treating a wall of very porous stone such as sandstone, iron sandstone or some limestone, it is best to inject the stone itself. Follow the lowest joint in natural stone. In the presence of an old flood barrier, drill below its level. Drill several holes in a star formation in corners for complete impregnation.
- Remove all drilling dust from the holes.
- Screw the injection hose onto the sausage. Insert the hose to the rear in the drill holes and fill it with a slowly retracting movement. Leave the last cm unfilled.
- Close the holes with Tec7 Filler.
SIZE: 3 x 550 ml
ITEM CODE: 5414195012383